question about the cascade

nabend to all!
so at the TV cascade is so testing jobs described, that if you make sure wants parallel output to Cascades and hv output 10 x 1kOhm in series switch (think it was 1kOhm or?)
I use 1/4 Watt 5x1Mohm in series... of course the go also but my question is, how long it takes until the Cascade with my resistance to discharge?

so is to put it only purpose a creep annen hv out and resistance after the lightning draw not to have Cascades sin because for Lightning discharges! so how you described did Lisa total nonsense (creep to hv out un gnd)
Since verbrätsst you only powah and there will be no output

I he hv is out and you mean gnd...aber should I the resistance of hv out give up and after the resistance that spark is stupid is go to... öhöm then only that the cascade itself to not discharge "the play" when the resistance only the hv out xD


why the playing unloaded
one that is Yes so a dumb question: simply mim HV cable to gnd
and feddisch. Nevertheless you fingers so not to and builds the inside nice housing
and your resistors let get away the swallow only the powah
If se it you have no output
again let this stupid resistors away
and so resistance is duty Abdullah cascade otherwise gehtse flutes
so hv out and the cable where the creep on de the radio pull